Types of wood for baths and saunas: advantages and disadvantages

Not every wood is suitable for building a bath. Let's look at the most famous conifers - this is pine, cedar and larch. At first glance, it seems that these tree species are of the same type and practically do not differ in anything, but this is not so. They have their differences in key indicators, which are very important for building a house or bath.

Larch

Siberian larch is one of the most valuable tree species. Externally, larch is similar to all conifers. The wood has a brownish tint. In density and strength, it is one third superior to pine and is a serious competitor to oak and ash. The fact is that larch wood is impregnated with resin, which is a natural antiseptic. Thus, this type of tree does not require additional processing, because nature herself took care of this. Therefore, baths and houses built of larch, stand for a long time. Larch perfectly tolerates moisture, does not rot, it is fundamentally different from pine.

Disadvantages of larch wood

1. High thermal conductivity. The lower the coefficient of thermal conductivity, the better the material retains heat, the more slowly it gives off. Larch has a thermal conductivity of 130 mW / (m * K) versus 95 mW (m * K) of cedar. Larch houses and saunas are 45% colder than cedar.
2. Relatively high price. Therefore, to reduce the cost of the final product, larch is often combined during construction with pine, using only in the initial stages. Logs, the floor and the first three crowns of the walls are made of larch, which are prone to decay (which often affects pine). However, it should be understood that the combined bath of larch and pine will not be warm. The reason for this is the high thermal conductivity of both pine and larch.

Cedar is considered the most elite scaffolding with great strength and low thermal conductivity. Compared to brick, cedar has an index of 1/5, i.e. 10 cm of cedar replaces 50 cm of brick. Therefore, baths built of cedar are very warm. Even without additional insulation in cedar baths, barrels, you can safely soar at -25 degrees!

In addition to strength, cedar has a number of very important advantages over its counterparts. Phytoncides secreted by cedar are considered medicinal. Houses chopped from cedar will be the cleanest and easy to breathe in.

Benefits of Cedar Wood

1. Low thermal conductivity - keeps heat well
2. Healing phytoncides for healing the body
3. Strength
4. Rot resistant
5. No additional antiseptic treatment required

Cedar wood has a beautiful texture and a pinkish tint. It lends itself well to processing. If we compare pine and cedar from the point of view of resistance to decay and cracking, then the cedar has absolute superiority in this regard.

The disadvantages of cedar wood

1. Relatively high price (more expensive than pine)

With all the advantages of cedar, there is a minus - cedar is more expensive than pine, which means cedar baths will cost more. But they will last longer and you can soar in them even in winter in cold weather.

Due to the antiseptic properties in cedar baths and houses there are no mold fungi and microbes. Cedar baths have a special advantage - an unusual aroma, light air and wellness steam.

Pine

Pine is a good building material, but it is inferior in strength and durability to larch and cedar. It is strong enough and, if you do not plan to bathe in the cold season, you will not freeze in a pine bathhouse. In addition, pine is the most affordable, so very often inexpensive saunas are made from pine.

Benefits of Pine Wood

1. Price - pine baths are the cheapest
2. Strength
3. Ease of processing

However, unlike cedar and larch, pine need to be treated with antiseptic agents, as it is subject to decay. The upper layers of wood are softer, able to absorb moisture and are especially susceptible to “blueing” of the fabric. Such a bath will not last you long, but as an option for an inexpensive summer bath for 5-7 years, it is quite functional.

Disadvantages of pine wood

1. Fragility
2. High thermal conductivity - pine baths are “cold”, quickly give off heat. You can not bathe in the winter
3. The need for additional treatment with antiseptic compounds

If you plan to bathe in the bath both in winter and in summer, then cedar is more suitable. The bath will serve for a long time, reliably and will help to improve the body.

Which tree is better for a bath - thermal conductivity table

For those who like numbers and specifics - below is a comparative table of the thermal conductivity of wood.

The lower the coefficient of thermal conductivity - the worse the material transfers heat. This is exactly what we need, so that the walls of the bathhouse do not give off heat to the outside. For example, the coefficient of thermal conductivity of vacuum is 0; it does not transfer heat. This property is used in thermoses (when double walls are made) to maintain the temperature of the contents.

The table shows that the best choice of wood for a bath available in Russia is cedar. It has the lowest value of thermal conductivity due to the small-layer structure, which retains heat well.

Table of thermal conductivity of wood of various species

The table shows that for our region the cedar is the warmest material. It has the lowest thermal conductivity. Baths and houses made of cedar warm up very quickly and remain warm for a long time. In addition, they perfectly breathe and sleep thanks to the "breathing" structure of wood. The material itself is easy to process.

Why is a barrel bath cold in winter

Sometimes people complain that the barrel bath is cold in winter. Now you know why this is happening. If you make a barrel bath from pine, it will be a priori cold in winter. It is not worth spending money and checking empirically, you have proof in numbers - a thermal conductivity table. Even with a positive, but low temperature, you will have to heat more to maintain the required temperature. And with minus winter it’s impossible to steam at all - the bath will cool very quickly.

Therefore, if you decide to buy or build a bath yourself - choose a cedar. And don’t throw money away, and you will be soared and rejoice for many years.

Besides the fact that cedar keeps heat well, it is also, unlike pine trees, not prone to mold and rot. Soft pine, if it is not regularly treated with protective compounds, it begins to “turn blue” and rot, because mold forms between the fibers. Although pine is the cheapest material, in this case, chasing cheapness is not the best option.

Link to the article

Link to the article

Materials for decorating the bath and sauna should be chosen with special attention, because in the steam room you and your loved ones should be comfortable and safe. In this regard, practically no materials are used in such rooms, except for eco-friendly natural wood - but it is not so easy to choose it without preliminary theoretical preparation. Each tree species has certain properties, which will determine the microclimate of the steam room, and even the healing effect during the procedures. To make it easier for you to decide on the choice of wood, in this article we will talk about its types and consider the advantages and disadvantages of each of them.

CHOOSE WOOD FOR A BATH AND SAUNA

The traditions of bathing procedures are rooted deep in the past - and this means that our ancestors have accumulated enough information about the properties of a particular tree species that grows in our country. Let's take advantage of this knowledge and look at the well-known trees from the point of view of finishing baths and saunas.

Cedar

The “cedar” finish of the bathhouse or sauna looks very beautiful and noble. This tree is easily processed, highly resistant to temperature changes and moisture, is not afraid of insects and fungi. Cedar is rich in healing essential oils, thanks to which a unique aroma will reign in the room.

However, the persistence of the aroma is attributed to the disadvantages of cedar - some owners of cedar paired annoyingly note that enjoying the smell lasted a little more than six months, and the lining of cedar cost a lot of money.

Oak

The most dense, strong and durable is oak wood. It is distinguished by an attractive texture, which, undoubtedly, is a plus, and a very high price, which can be attributed to disadvantages. Also, the problem can be the heavy weight of the material, which will complicate the finishing work.

Larch

Larch has a reddish, resinous wood that does not change color over time, which contains many substances useful to the human body. This type of wood is not inferior to oak in its mechanical properties, and in conditions of high humidity and temperature it will easily serve for more than a dozen years. With its durability, larch is not too expensive, but its modest price can not be called.

The disadvantages of larch are the difficulty in processing and insignificant thermal insulation properties.

Alder

Alder has the most important property for a bath and a sauna - it does not overheat, which prevents burns. The reddish shade of wood and its special aroma, which is often compared with the aroma of cognac, only become more saturated and noble over time. Alder is ideal for a steam room and in its physical properties: it does not emit tar, tolerates temperature changes and humidity, but it is not easy to choose a high-quality and even lining made of this wood, but it costs a lot.

Linden

Linden tea, linden honey ... How much benefit from one tree! And it does not end there, because linden is also a popular material for decorating baths and saunas, very revered in Russia. Linden wood products are easy to process, do not crack, have a soft pink color and spread a pleasant natural aroma. Finishing with a pair of linden lining is recommended for those who are interested in the prevention of respiratory diseases, as linden wood is famous for its beneficial effects on the lungs.

Among the disadvantages of linden, a gradual change in the color of wood and its softness are often distinguished, however, with careful work with the material and its subsequent careful use, this property of linden will not cause trouble - in general, the material is strong and durable. As for the price, linden lining will not be cheap, but not too expensive: we can say that this material is in many ways the “golden mean” in the decoration of baths and saunas.

Birch

The structure of birch wood is homogeneous and dense, being in a birch steam room helps to feel a surge of strength and quickly cope with colds.

Finishing a bathhouse or sauna with a birch is an affordable option with several “buts”: this material does not differ in strength and durability and can only be used in very dry rooms, since birch is worse than other breeds and can be contacted with moisture and can quickly rot.

Aspen

Another affordable finish for a bath or sauna is an aspen wall paneling, whose soft wood is resin-free and easy to process.

The disadvantages of aspen are exposure to woody diseases and the darkening of wood over time.

Conifers - pine, spruce

The cheapest is the lining of needles, the advantage of which, in addition to low prices, are high thermal insulation qualities. Of the disadvantages, it is worth noting the strong release of resin and poor tolerance of contact with moisture.

Abashi

So we examined the trees familiar to the inhabitants of Russia, however, our oak has an African counterpart, which cannot be ignored when it comes to finishing the bath and sauna - this, as you might guess, is the famous Abashi oak.

The wood of this tree is light, strong and durable, characterized by maximum comfort in contact with open areas of the body, since it does not overheat at all. It has no knots and does not emit pitches.

There is probably only one drawback to this material, which is surprising in its properties - the high price.

WHAT DO YOU NEED TO REMEMBER WHEN CHOOSING WOOD FOR A BATH AND SAUNA?

Before making the final decision regarding the type of wood that is suitable specifically for your bath or sauna, it is worth considering several significant nuances.

Firstly, if the resinous species of wood has become your favorite, remember that it cannot be used to decorate the ceiling of the steam room, as the emitted resin may begin to drip down when heated. The same goes for door handles and other items that you will often touch.

Secondly, to protect wood from moisture, if there is such a need, it is possible only with special water-repellent means, and not with the help of paints and varnishes. If active water procedures are planned in your bath, it is better not to skimp and choose a moisture-resistant wood species, which will help to avoid the cost of processing impregnations in the future.

Well, now you are well versed in the matter of choosing wood for finishing the bath and sauna, and you can already imagine what your own steam room will look like. The harmonious decoration of this room with a natural tree, in addition to having a healing effect on the body, will also please the eye - so think carefully about all the details of your project, and let the visit to the steam room every time become a celebration for both body and soul!

Log

For construction, round logs are used. A log is a trunk devoid of upper layers during processing. The core of the tree is not broken. The log remains solid, preserving its natural structure. Log structures are more durable, more resistant to moisture and hold heat better, however, shrinkage of such a building can take up to 5 years. The shrinkage time directly depends on what tree the loghouse for the bath is made of.

The beam is cheaper, but this material, due to the specifics of production, requires additional processing and protection. If you correctly choose which tree to use for the bath, then the bath from the beam will not yield to the bath from the log. The shrinkage time of the beam is much shorter, there are many opportunities for various design decisions. Evidence of this is the diversity of timber bath houses.

Frame bath

This is the cheapest option. It is built in a short time at any time of the year, almost does not shrink, is quite comfortable and warm, since modern heat and vapor insulation materials are used. The problem is the competent selection of insulating materials - they need a lot, and high-quality insulation is not cheap. If you save, then such a bath will not be possible to use in the winter due to dampness and cold.

To the question "which bath is better - from a timber or frame", experts will answer: from a timber. And if you think about it: a log or a timber - which is better, then here the answer cannot be unequivocal. A beam, if it is of good quality, will not give way to a log, but will be cheaper. Therefore, the choice depends solely on personal preferences.

The most popular types of timber for a bath

Depending on the production technology, the beam is divided into several types. Consider the most basic:

• normal - has a rectangular or square cross section and a solid structure,
• glued - made by gluing wooden stripes-lamellas.

Glued beam

Which timber is better glued or ordinary? An ordinary beam is heavier, it may have defects in the form of curvatures and bends. Laminated timber of good quality is not inferior to a solid one in consumer characteristics, and sometimes surpasses it. No wonder the Finns are building houses from high-quality glued timber (Finnish timber). The glued beam has a more aesthetic appearance, it is lighter and practically not prone to shrinkage. Therefore, glued beams are perfect for building a bath.

Profiled beam

A solid bar may have a profile. It is made in such a way that the bars are adjacent to each other without gaps and crevices (spike-groove connection). Today, profiled timber is the most popular material for low-rise construction. Which beam is better - glued or profiled? Let's try to compare:

• In strength, the profiled beam is slightly inferior to the glued analog.
• Profiled timber is more environmentally friendly than glued, as in the production of the latter, chemical adhesives are used. The better and harmless the glue, the more expensive the material.
• Profiled timber requires more time to shrink.
• The cost of profiled timber is lower.

Which beam for the construction of the bathhouse to choose - glued or profiled, everyone decides this question for himself. Both the one and the other have supporters and opponents with their arguments. Today, timber baths are the most popular option that will not disappoint you if you choose correctly which tree to build the bath from.

General characteristics

Cedarwood is a valuable, expensive, and practical material that is ideal for building saunas. By operational features, the breed is better than pine, spruce or larch, which has a demand in the construction industry.

Before building a bath, it is recommended to purchase excess material, in case of additional costs. This should be done for one reason - the color of the wood may differ for different brands.

There are three main types of cedar wood color:

• saturated yellow
• reddish color with a pink tint,
• tan.

The use of wood of different colors will violate the decorative integrity of the entire building.

An interesting fact: in ancient times, cedar was used in shipbuilding. Many houses in Venice are kept on stilts of the above grade. It is worth noting that cedar firewood for baths is in great demand. Wood has a charming, light aroma, invigorates and improves health.

Consider the benefits of the variety:

• Treatment. The processing of cedar is simple. It is elastic, soft and light wood. Due to this property, material manufacturers often use manual cutting. A simplified process of harvesting wood allows you to get large volumes of building material in the shortest possible time.
• Sustainability. Wood is not afraid of harmful insects, as well as mold and fungus. Most manufacturers do not even use special antiseptics to cover the logs before selling, as this is not necessary. Cedar is not afraid of high humidity and temperature.
• Special properties. Cedar has a pleasant smell and healing properties that have a positive effect on the body when visiting a bath. The special components that enter the air when heated make the atmosphere healthy and almost sterile. Experts say that visiting a cedar bath can be compared to a full-fledged inhalation session. Periodic receipt of bath procedures significantly improves the general condition of the body.

• Practicality. Despite the lightness, cedar is strong and reliable. Structures made of this material can stand for several centuries, provided that the construction was completed correctly using premium wood. Previously, cedar was used for the construction of the royal chorus. Wood is suitable for various types of buildings: a mobile bath, a tank bath, a barrel bath.
• Mounting. Properly designed cedar log house does not need special insulation or waterproofing. This feature will significantly reduce the time spent on construction, as well as material costs.
• Sustainability and safety. Cedar grows only in ecologically clean regions. Fresh air and soil without chemical impurities are prerequisites for tree growth. This indicates a high environmental friendliness of the material. The best choice for those who adhere to a healthy lifestyle.
• Aesthetics. The appearance of the building material is very important for the visual effect. Excellent aesthetic qualities are a must for any cedar building. The variety is used not only for the construction of baths, but also for the manufacture of furniture, accessories.

Wood is not without some drawbacks:

• Price. The main minus of wood is the cost. Due to the high price, only wealthy buyers can afford such material.
• Color. The color of the wood is attractive, spectacular, but heterogeneous. If you plan to use the tree in its natural form, without paint treatment, it is important to choose the material in one shade.
• Using. Cedar is great for building baths, but for a steam room it is advisable not to use it because of the current resins. Their excessive concentration in the air can cause an exacerbation of pulmonary diseases. They also clog pores on the skin, interfering with their natural cleansing.
• Additional expenses. Assign the construction of a cedar bath to experienced craftsmen. Only in this case you will be happy with the result. The bathhouse will look wonderful and delight with beauty for several decades.

It is necessary to refuse to use the variety if allergic people live in the house. For fans of heat - this tree is also not the best choice.

Optimal use - the frame of the room, dressing room, dressing room.

Experienced professionals will prevent shrinkage of the building and use the beneficial properties of wood to the maximum. However, do not forget that building a bathhouse on an individual project is an expensive pleasure.

Cons of cedar

The main difficulty when working with cedar is its high cost and relatively poor availability. To assemble a log house of one color is already an interesting task:

• Cedar has beautiful but heterogeneous coloring. Layers with different colors may be different. For example, a tree with a pinkish bark and a base under it may turn out to be bright yellow if lightly treated. If the bath is not painted in the plans, it will be difficult to pick up logs and assemble the log house so that it does not turn out to be too variegated.
• Cedar felling will be expensive. This choice will pay off many times due to the durability of the structure. But on the procurement of material, especially on its quantity, it is better not to save.
• Cedar do not use to equip a steam room. Cedar resins are fluid. Their excessive presence in the air contributes to clogging of pores on the skin, can exacerbate pulmonary diseases. For fans of extreme heat, this tree is not suitable. If the family has allergies, then it is better not to use cedar in a room with a heat source at all. It should be left for the locker room, dressing room, for the outer frame of the building.
• Cedar bath better built by professionals. It only seems that durable and easy to process material can be assembled into the object yourself. In fact, it is better to turn to the masters. After all, if something goes wrong, the price of the experiment will be too high.

A rare cedar is not affordable for everyone when it comes to building a turnkey bath. But everyone can afford some elements from this tree. For example, some companies offer special cedar barrels for baths, in which you can sit, having received all the useful trace elements from this wood.

Varieties

In the plant world, there are two varieties of cedar, which are divided into 9 separate subspecies. Regardless of the variety, trees grow very slowly.

The plant feels great in the following regions:

Despite the fact that the variety loves warm and mild climate, the Siberian variety tolerates severe frosts and long winters without problems. In the construction industry, three types of cedar are actively used.

Siberian

Some experts studying the plant world of the region claim that Siberian cedar does not exist. In this area only pine grows, outwardly similar to the above variety. Specialists attributed the Siberian cedar to the pine family.

Siberian cedar pine - evergreen tree, characterized by increased resistance to frost.

Altaic

On the territory of the Russian Federation, cedar is often found in the endless Altai forests. Specialists call this grade one of the best natural building materials. Wood boasts excellent anti-corrosion and heat-insulating characteristics. Do not forget about the beauty of the variety, medicinal properties and environmental friendliness.

Altai cedar fully meets the needs of modern customers as a strong, reliable and wear-resistant material. It is easy to handle and use. The process of planing and cutting wood is easy and effortless. Handling with a power tool or manual method is not difficult. If necessary, craftsmen can create a glossy, even surface of the material.

Felling from this variety is highly resistant to chemical elements, the vagaries of the weather, sudden changes in temperature and other negative effects.

Canadian

Red Canadian cedar can reach a height of 75 meters. The maximum trunk diameter reaches 6.5 meters. Building material is particularly soft, elastic, pliable, due to which it does not crack during processing.

The name of the variety does not characterize the color of the variety. Color varies from light beige to deep brown with a red tint. When heated, the tree does not emit tar.

An interesting fact: the oldest representative of this species grows in the territory of the Olympic Park in Washington. Today, his age is 1,200 years.

Conclusions

Cedar is an expensive pleasure, it is not only a rare type of tree, it is also heterogeneous. When planning the construction of a cedar bath, you need to buy excess material. After all, the color of the logs can vary significantly. It happens:

1. Reddish pink.
2. Tan.
3. Bright yellow.

If there is not enough material, you will have to contact the same suppliers. Otherwise, the log house will look ugly, which is not the best prospect for expensive construction.

Cedar does not tolerate greed and thrift. It is better to forget about these qualities during the construction of a cedar pine bath immediately.

But there are some nuances in the building materials market. Nevertheless, in Russia they love a bath, designers take some steps towards the client. For example, some companies offer turnkey log houses.

You can choose an interesting architectural project, and then assemble the building, like a regular designer. Such solutions eliminate the need for long trips to different construction markets in an attempt to find cedar logs that are suitable in size, color, and structure. This solution is particularly suitable for this material. Is it worth it to think about cutting the bathhouse frame on the site itself. Indeed, when transporting logs, the finished log house may slightly deteriorate.

Manual cabin

Wood harvested by manual cutting is actively used to create a strong and reliable building material. This method is actively used in the processing of coniferous varieties. Professional companies procure products in the winter for the whole year ahead.

Hand-made cedar is ideal for building baths, country houses, arbors and other structures.

Trees are cut down at night. The bark is removed manually with an ax. In the process, no more than 0.5 centimeters of the layer is removed to protect the tree from negative environmental factors. If necessary, antiseptics are used.

Before you send the material to store shelves, it should lie down for about six months. The material is laid on top of each other with a grill and protected by a canopy, leaving room for ventilation on the side.

Most specialists from the construction industry are confident that such material is much better and more practical than logs. The second option is also inferior in connection quality and material thickness.

The network has many opinions about cedar wood baths. Most buyers who spent large sums on building material were satisfied with the result. At a high level, operational characteristics were noted, such as reliability, durability, easy handling, stability and wear resistance.

Designers noted the variety's attractiveness, color saturation and expressiveness of the pattern. Among the many positive reviews, there are also negative ones. Some consider it inappropriate to spend such amounts on cedar and advise choosing a more affordable and common option.

The following video provides an overview of the giant bathhouse from Siberian cedar.

Features

Baths are built from different coniferous wood. Each option has its advantages:

• Cedar is the warmest blockhouse that creates healing air around itself.
• Pine is the cheapest log cabin.
• Larch is the most durable, but the most expensive log house.

However, the cedar bath is the ideal solution.

Although some classify cedar as an elite wood, it is better to spend it once, but to know that you have invested money for good reason. A chopped cedar bath, using the right construction technology, can last its owners a hundred years. You only need to take care of the additional protection of this valuable tree during construction.

Types of manual cabin baths

The duration and complexity of the installation of the structure depends on what type of cedar bathhouse you choose. The most popular Russian and Canadian technologies for building a log house made of wood. The Russian version of logging is the most inexpensive, but at the same time quite reliable. Altai cedar for the bath is harvested in the winter, and the log house is folded from a round log with a prosthesis. Canadian technology allows you to erect a log house at any time of the year without any special financial and time costs. This design will also be durable and reliable.

What you need to know about log shrinkage

Shrinkage of a log house of wooden buildings is a gradual process that occurs as a result of drying of wood. The higher the moisture content of the original wood, the lower the bath ceiling will fall over time. If you do not use a ready-made mobile structure (for example, a barrel bath or a tank bath), then the builders advise at the first stage of construction to build a foundation and a log house, make a rough finish and cover the roof with roofing material. But it is better to insert windows and doors, as well as to carry out all finishing work with a roof over the year, when the main shrinkage of the walls of the structure occurs.

Mobile saunas

Currently, many construction companies offer a very original form of compact baths. The manufacturer can either build a building on your site, or bring an already finished building, since it does not take up much space. There are several mobile varieties: tank, barrel, quad-barrel, Viking and many others.

A cedar barrel bath does not need large financial investments or a spacious land plot.

However, this does not mean that such a mini-bath will be somewhat "flawed", the advantages of this design are many:

• The “turnkey” option will appear on your site immediately after the purchase without the noise, inconvenience associated with repair work and long wait.
• Before buying, you can see the bathhouse with your own eyes, knowing exactly how it will look inside and out.
• You can easily change the place of a mobile bath in a summer cottage, and if you wish, you can even take it with you on a camping trip or fishing.

• The durability of the cedar construction allows you to use the bathhouse even in extreme climatic conditions.
• Such baths are characterized by a high heating rate, which increases the usability of the building.
• The low thermal conductivity of the cedar and the unique design of the "barrel" create the effect of "thermos" inside. Heat remains for a long time indoors.
• A wide selection of shades of cedar (from "pink peach" to "dark chocolate") allows you to choose any design of the building in accordance with personal taste.

Reviews

Builders and owners of cedar baths note the many positive characteristics of such structures. Baths warm up very well, as they have a dense structure. At the same time, the air in the steam room does not “burn”. And for those who have ever had lung problems, a cedar bath becomes a real natural doctor. Many people experienced the improvement after regular procedures in such a fragrant room.

Many builders pay attention to the fact that cedar wood is very dense and heavy.

Therefore, when building it is important to make the most reliable foundation.so that over time you do not have to redo the design. You can, for example, choose a strip type of foundation. Also, from the “tips” of professionals, it is worth noting that when arranging a log house, the lower crown should be made of larch.

Conclusion

It is no secret that many acquire a summer cottage just to build a bathhouse there and enjoy a good rest before the working week. When choosing a material, do not hesitate. Coniferous wood is preferable because of its pleasant smell and undoubted benefit. If you are financially stable, do not worry that building a bath will require a solid investment. The option of cedar justifies all the costs with interest.

It will allow you not only to enjoy the bathing process, but also can significantly improve the state of your health, because such wood cleans the air, favorably affects the physical and mental state of those nearby.

Watch the video review of the cedar bath in the video below.

Aspen

Aspen is close in properties to linden, but is denser and surpasses it in some characteristics:

• practically does not crack upon shrinkage,
• minimal shrinkage
• more moisture resistant and durable than linden.

Aspen wood has a beautiful bright red hue, but is also not without drawbacks:

• due to the high density, the processing process is quite time-consuming,
• not always of high quality.

Aspen wood for a bath is a good option, but you should pay attention to the quality of the material. In many regions of Russia, due to climatic conditions, unhealthy ones grow, with the decayed middle of the aspen. Good and high-quality material is often imported, which affects the cost. Aspen is often used for interior decoration in the construction of the bath.

This tree boasts the strongest wood, which determines the uniqueness of its characteristics:

• hardness and strength
• resistance to high temperatures,
• beautiful color and expressive wood texture.

However, for a bath, oak is not the best material. Causes:

• afraid of moisture (with prolonged exposure to high humidity and subsequent drying, the wood becomes excessively hard and cracks in the longitudinal direction),
• oak wood bathhouse log houses are heavy and need a reinforced foundation,
• processing of oak wood is a rather difficult process,
• high price.

Now let's try to answer the question: what tree to make a bath from? If you are not limited in means, then you can afford an expensive bath of oak, larch or aspen. This does not mean that the other options do not deserve attention.

To get a good bath at an affordable cost, you can choose a quality, well-crafted beam of pine or spruce.

Furnishing the bath from the inside

Having decided which tree you will use for the bath during the construction of walls, you should not forget about what will be inside. If you are afraid of the resinous softwood, then you can additionally make the interior decoration of the lining. Which tree is the inside of the bathhouse trimmed with? As a rule, hardwood is used. Of conifers, cedar or larch is preferable.

Lovers of steam will ask a question: which tree is better for a steam room bath? Specialists recommend using hardwood: linden, aspen, alder, etc.,

Recently showers are popular, but the usual plastic design is not suitable for a wooden bath. Manufacturers offer wooden showers for the bath, which harmoniously fit into the interior of the room.

Building a bathhouse is a crucial step requiring a competent approach. Now you know what kind of wood it is better to build a bath from, but you still need to consider many more nuances. You need to weigh your wishes, calculate strengths and capabilities, and only after that proceed with the construction. And for the construction to be short-lived and of high quality, it is better to resort to the help of specialists. In this case, the bath will please you, give rest and health for many years.

Interesting Articles

What primer for wallpaper to choose - a detailed material guide

December 23,2024

Living room interior design: decorating a wall with a TV

December 23,2024

How to remove old tiles in the bathroom: 5 ways

December 23,2024